Atactic Polypropylene Grafted With Maleic Anhydride As A Compatibilizer and Crystallizing Agent for

Both polypropylene (PP) and polyamide (PA) are widely used polymeric materials, but both have their own advantages and disadvantages that limit the scope of use. In recent years, blends of PP and PA have attracted attention because they can combine the advantages of both and eliminate their disadvantages, and the key to achieving these goals lies in solving the compatibility of PP with PA.

Development of Polylactic Acid-based Materials With Highly And Balanced Mechanical Performances Via

Replacing petrochemical-based polymers with bio-based and biodegradable materials poses environmental, economic and safety challenges. Polylactic acid is considered to be one of the most promising alternatives due to its high mechanical strength and stiffness, biodegradability, biocompatibility and non-toxicity.

The Effect of Maleic Anhydride Polyethylene on Mechanical Properties of Pineapple Lea

In recent years, people gradually realize that the environment is deteriorating, and the research of biodegradation properties of natural fiber composites has indeed aroused many people's interest. Pineapple leaves (PALF) are not only biodegradable, but also environmentally friendly to synthetic leaves.

Properties of Poplar Fiber Polylactic Acid Composites Comparison of Maleic Anhydride and KH550 Modif

Natural fiber reinforced polylactic acid (PLA), as a kind of biological composite material, has aroused great interest in composites science in recent years. Natural fiber reinforced Polylactic acid composite material has the advantages of natural fiber and polylactic acid.

Effects of Different Contents of Carbon Fiber on Properties of Polypropylene Composites

Polypropylene (PP) is a widely used plastic but is limited in some applications due to insufficient mechanical properties. Fiber's reinforcement can effectively improve the mechanical properties of PP.

Effect of Compatibilizer Addition on the Surface Nucleation of Dispersed Polyethylene Droplets in a

A significant portion of the global plastics market encompasses the production of polyolefin materials and especially polypropylene (PP) and polyethylene (PE), as commodity polymers with a wide range of applications.

Effect of Maleic Anhydride Grafted Polylactic Acid Concentration on Mechanical and Thermal Propertie

Polylactic acid (PLA) is blended with native starch or thermo plasticized starch (TPS) for preparing biodegradable composites. However, poor compatibility of PLA with starch results in the composites with inferior mechanical properties. This study examines the effect of Maleic Anhydride-Grafted-PLA (GMAPLA) coupling agent and its concentration on the extent of improvements in mechanical and thermal properties of PLA –TPS blends.

Plasticizer Enhancement on the Miscibility and Thermomechanical Properties of Polylactic Acid-Chitin

In previous research, a polylactic chitin starch composite was prepared without the use of a solvent to enhance the miscibility. In this study, a polylactic acid (PLA) chitin starch composite was produced with chloroform as a plasticizer in the ratio 1:10. The blending of chitin and starch with PLA ranges from 2% to 8%. Tensile strength, impact, thermogravimetry analysis-Fourier-transform infrared spectroscopy (TGA)-FTIR, and differential scanning calorimetry (DSC) were used to test the thermomechanical properties.

Grafted Polypropylene with Maleic Anhydride and Styrene as a Bulking Agent for Biodegradable Poly(Ma

Polypropylene (PP) is one of the most versatile polymers, which is widely used in many fields such as automobile, electronics, packaging, building materials and fiber because of its low cost, high thermal stability, stable chemical properties and good water insolubility. However, PP is a non-polar polymer with low compatibility with other polar materials, and improving its compatibility with other plastics has become a hot spot for current research.